TDK has introduced 1.5 and 3W models to its CCG series DCDC converters which can provide full load in ambient temperatures from -40 to 85°C with convection cooling. Applications include battery powered equipment, process control, data communications, telecommunications and test/measurement products.
Output voltages are 3.3, 5, 12, 15, ±12 or ±15V, while dual output versions can be connected to provide a single 24 or 30V supply. All voltages and output power combinations can operate from either a 4.5 to 18, 9 to 36 or 18 to 76VDC input.
Single output models can be adjusted using the trim terminal over a -5 to 10 per cent range for non-standard voltages. All models are protected against over-current and the output can be inhibited using the remote on/off function. The input to output isolation voltage is 1,500VDC.
The converters share a common plastic case measuring 15.7(l) by10.4(w) by 11.5mm (h). A choice of through-hole or surface-mount terminations is available in both power levels.